Trucking news · safety · Nov 16, 2026 · 4 min read

Daimler, Paccar Recall: Driveline Defect Puts 4,900 Trucks at Risk

Nearly **4,900** Freightliner, Western Star, and Kenworth trucks are recalled across North America due to a missing snap ring, risking driveline separation on the road.

Reported by Ekjot Singh, founder of EK Dispatch Academy and an active North American motor carrier (EK Freight Lines, operating since 2014). Primary source: Trucking Info.

Ekjot's take — working-carrier commentaryAnother day, another manufacturer defect putting our working truckers and their livelihoods at risk – it's past time these companies prioritized safety over quarterly reports.

Imagine you're rolling down the highway, full load, making good time. Suddenly, a thud, a metallic clang, and your truck's driveline decides to part ways with the vehicle. Not a nightmare scenario, but a very real danger facing thousands of trucks on North American roads right now. Daimler and Paccar, two giants of our industry, have issued a massive recall that every driver, dispatcher, and fleet owner needs to pay attention to.

What happened

The National Highway Traffic Safety Administration (NHTSA) announced that nearly 4,900 trucks from Freightliner, Western Star (Daimler Truck North America), and Kenworth (Paccar) are under recall. The core issue? A critical snap ring on the driveline might be missing. This isn't a minor glitch; a missing snap ring means the driveline can separate from the truck while in motion. We're talking about models from 2023, 2024, and even 2025 production years, including the Freightliner Cascadia, Western Star 47X, 49X, and Kenworth T680, T880, and W990. The defect specifically affects the front and rear drivelines, depending on the truck configuration. Imagine the chaos: a loose driveline whipping around, potentially damaging air lines, fuel lines, or even becoming a projectile on the highway. Daimler estimates about 1% of the recalled units actually have the defect, while Paccar puts their estimate at 2%. Even if those numbers seem low, 1% of 4,900 is still 49 trucks with a ticking time bomb. Owners will be notified by mail in late June or early July, with dealers inspecting and replacing the driveline assemblies as needed, free of charge.

Why it matters for dispatchers/drivers

This isn't just a maintenance headache; it's a safety crisis waiting to happen. For drivers, a driveline separation means an immediate loss of power, potential loss of control, and a severe road hazard for anyone behind them. It can lead to catastrophic accidents, not to mention stranding you hundreds of miles from home or a repair shop. Think about the downtime, the missed delivery windows, the HOS clock ticking away while you wait for a tow. For dispatchers, this recall means immediate action. You need to identify which of your fleet's VINs are affected, reroute loads, manage driver schedules, and coordinate with maintenance for inspections and repairs. In this current tight freight market, every hour a truck is off the road costs money – money that's already hard to come by. The pressure to keep trucks moving is immense, but safety cannot be compromised. This kind of defect also highlights the absolute necessity of thorough pre-trip and post-trip inspections, a core part of the curriculum we emphasize at EK Dispatch Academy.

My take

This is unacceptable, plain and simple. Daimler and Paccar are two of the biggest names in trucking, and for such a fundamental component to have a manufacturing defect like a missing snap ring is a serious failure in quality control. Our working truckers are out there every day, battling weather, traffic, and tight schedules, and the last thing they need is to worry about their rig falling apart underneath them due to a preventable factory error. These recalls aren't just an inconvenience; they're a direct hit to the livelihoods of owner-operators and the profitability of fleets already navigating a tough market. Manufacturers need to step up and ensure their products are safe and reliable from day one. The burden of this recall, from identifying affected units to scheduling repairs and dealing with downtime, falls squarely on the shoulders of the very people who bought their trucks. We need more accountability from the top. Ekjot Singh, EK Dispatch Academy.

What you should do

  • **Immediately check your VINs** against the recall notices (Freightliner/Western Star: NHTSA Recall ID 24V-352; Paccar: NHTSA Recall ID 24V-348). Don't wait for the mail.
  • **Prioritize pre-trip inspections:** Pay extra attention to the driveline, looking for any unusual play, looseness, or signs of wear. While a missing snap ring might not be visible without getting under the truck, any vibration or unusual noise should be investigated.
  • **Communicate:** If you're a driver, report any suspicious noises, vibrations, or performance issues immediately to your dispatcher or fleet manager. If you're a dispatcher, ensure your drivers are aware of this recall and what to look for.
  • **Schedule repairs promptly:** Once your truck is identified as affected, get it to a dealer for inspection and repair as soon as possible. Delaying could mean catastrophic failure on the road.
  • **Educate yourself and your team:** Understanding vehicle components and potential failure points is crucial. EK Dispatch Academy's curriculum covers essential mechanical awareness that helps dispatchers anticipate issues and communicate effectively with drivers and maintenance.

Primary source: Trucking Info

Train as a dispatcher — C$199 / 30 days →